Q:-The air conditioner does not operate immediately when dry or cooling operation is activated.

ANS:-  When dry or cooling operation is activated with the auto fan speed setting set to ON, the SMELL PROOF operation starts and removes stagnant odor from the indoor unit before air is discharged. Therefore, the unit does not discharge air immediately after the operation starts. Please wait for about 30 to 40 seconds.

Did this solve your problem?Contract me :- aminservics@gmail.com

 

 

 

 

Q:-The air conditioner does not operate immediately when operation is restarted immediately after stopping, or the operation mode has changed.

ANS:-This is not a malfunction of the air conditioner.

This is to protect the air conditioner. Please wait for about 3 minutes.

Did this solve your problem?Contract me :- aminservics@gmail.com

 

Q:-The air conditioner does not operate immediately when the unit is turned on during or after filter cleaning operation.

The air filter is returning to normal position. Please wait for about 3 minutes.

Did this solve your problem?Contract me :- aminservics@gmail.com

 

Q:-Warm air does not flow immediately after starting the heating operation.

This is not a malfunction of the air conditioner.
The air conditioner is warming up. Please wait for about 3 minutes.

Did this solve your problem?Contract me :- aminservics@gmail.com

 

 

Q:-The breaker or ground-fault interrupter trips or the fuse blows.

ANS:- Stop operation, unplug the power cord or turn off the circuit breaker, and contact the place of purchase.

Did this solve your problem?Contract me :- aminservics@gmail.com

 

 

Q:- The air conditioner does not operate for Streamer air purifying operation. The unit does not produce any discharge sound.

• Is the front panel closed? If it is open, close it.
• Is the Streamer unit installed properly? Insert the Streamer unit all the way.
• Check if the tip of the needle in the Streamer unit is dirty. If it is dirty, clean it.
• When the room temperature approaches the set temperature, Streamer discharge stops and the air flow volume becomes low.

Did this solve your problem?Contract me :- aminservics@gmail.com

 

 

 

Q:-The air conditioner does not operate. (The operation lamp flashes.)

Unplug the power cord or turn off the circuit breaker. Wait for about 1 minute, and then turn on the power. If the operation lamp flashes, contact the place of purchase.

Did this solve your problem? If not, please contact your nearest Amin Impex representative.

Q:- The ON/OFF button on the main unit or remote controller does not work.

ANS:- Stop operation, unplug the power cord or turn off the circuit breaker, and contact the    place of purchase.

Did this solve your problem?Contract me :- aminservics@gmail.com